Man Hours 1.5
Special Instructions:
1. Review manufacturer's instructions.
2. Maintenance should be scheduled every 50 hours of operation or twice a
season.
3. Routine cleaning, lubrication, and the application of rust preventive
compound to bare metal parts of the equipment prior to storing shall be
accomplished by the operator.
Items to Check & Initial Completion:
1.___ Change engine oil (Note: Oil should be changed at end of season prior to
storing for summer). Review the Material Safety Data Sheets (MSDS) for
proper disposal of used oil. If appropriate, recycle oil at an authorized
station.
2.___ Service air and fuel filters.
3.___ Clean and gap or replace spark plug.
4.___ Inspect blades.
5.___ Inspect unit, remove any debris from cooling air passages, and make other
needed adjustments.
6.___ Clean up work area, and remove all debris.
Tools & Materials:
1. Standard Tool Kit
2. Gap gauge
3. Lubricants. Consult the Material Safety Data Sheets (MSDS) for hazardous
ingredients and proper personal protective equipment (PPE).
4. Filters - fuel and air
5. Spark plug (if required)
Table of Contents | Next