Man Hours 3
Special Instructions:
1. Review manufacturer's instructions.
2. Pump maintenance should be scheduled to coincide with drive motor PM
Inspection MOTOREL>1HP
4. Open, tag, and lock out circuits serving motor when applicable.
Items to Check & Initial Completion:
1. ___ Check that base bolts are securely fastened.
2. ___ Observe pump in operation, noting unusual noises or vibration, pressure or
leakage.
3. ___ After shutdown, check suction and discharge valves for holding.
4. ___ Remove cover and inspect internal drive components, looking for proper
clearances, wear, or corrosion.
5. ___ Lubricate all fittings.
6. ___ Drain oil, flush, and fill to proper level with new oil. Review the
Material Safety Data Sheets (MSDS) for proper disposal of used oil. If
appropriate, recycle oil at an authorized station.
7. ___ Clean strainer and replace any cartridge type filters.
8. ___ Check packing and adjust or replace as necessary.
9. ___ If applicable, check belts for wear, adjust tension and alignment, and
replace belts as necessary.
10.___ If applicable, check drive shaft coupling and motor and pump alignment.
Tools and Materials:
1. Standard Tool Kit
Plus Pipe wrenches to 24"
Tubing cutters
Flaring tool
Small acetylene outfit
Packing tool kit and packing
3/4" socket set
Crescent wrenches to 14"
2. Grease gun, grease, oil
Table of Contents | Next