Items to Check & Initial Completion:
1. ___ Lube fan and motor bearings
2. ___ Inspect sheaves
3. ___ Check/clean condensor and evaporator coils, as
required
4. ___ Lube and adjust dampers and linkages
5. ___ Clean drains and drain pans
6. ___ Check motor operating conditions. Take amp.
reading
7. ___ Inspect all electrical connections, contactors,
relays and operating safety controls
8. ___ Leak check all refrigerating circuits with electronic
leak detector
9. ___ Check compressor, check operating conditions and
adjust as required
10. ___ Start compressor, check operating conditions and
adjust as required
11. ___ Secure all unit panels and roof flashing around
unit and clean debris from roof.
Comments and Recommendations:
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
Table of Contents | Next