Items to Check & Initial Completion:
1. ___ Lube fan and motor bearings
2. ___ Replace belt(s) and check drive and load sheaves
3. ___ Lube and adjust dampers and linkages
4. ___ Replace filter(s)
5. ___ Check motor operating conditions. Take amp.
reading
6. ___ Check all electrical connections, contactors,
relays and operating safety controls
7. ___ Check and clean drains and drain pans
8. ___ Clean humidifier, if applicable
9. ___ Inspect, clean and lube the burner and
combustion control equipment
10. ___ Check burner sequence of operation and
combustion air equipment
11. ___ Secure all unit panels and inspect roof flashing
around unit
12. ___ Remove all debris from roof
Comments and Recommendations:
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
Table of Contents | Next