Items to Check & Initial Completion:
1. ___ Inspect and vacuum burner section, remove loose
scale and dust
2. ___ Check flame and ignition characteristics
3. ___ Check and clean fan compartment
4. ___ Check drive and load sheaves
5. ___ Lube fan and motor bearings
6. ___ Check motor mounts and vibration pads
7. ___ Check high limit cut-out
8. ___ Check all electrical connections
9. ___ Check humidifier
10. ___ Take motor amp. reading
Comments and Recommendations:
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
Table of Contents | Next