Man Hours .5
Special Instructions:
1. Use rubber gloves, apron and plastic face shield.
2. Do not spark battery terminals or smoke while performing maintenance.
3. Review manufacturer's instructions.
Items to Check & Initial Completion:
1.___ Inspect for structural defects and deposits.
2.___ Clean off corrosion deposits and apply silicone grease to terminals.
3.___ Push test button and observe light operation. (See manufacturers
instructions.)
4.___ Check vent holes.
5.___ Clean exterior with dry cloth.
6.___ Unplug unit to check operation.
7.___ Clean up work area.
Tools & Materials:
1. Standard Tool Kit
Plus Insulated pliers and screwdrivers
Wire strippers
Wire crimpers
Voltmeter - Ohmmeter - Milliammeter
Clamp on meter(volt - ohm - amp meter)
Soldering kit
1/8" 25' fish tape
Burnishing tool
2. Cleaning equipment and materials
3. Direct Current Volt Meter
4. Hydrometer
5. Silicone grease
6. Acid resistant rubber apron, gloves, and face shield.
Table of Contents | Next