Man Hours 5
Special Instructions:
1. See manufacturer's instructions.
2. Secure any attached electrical gear.
3. Notify personnel in area.
Items to Check & Initial Completion:
1. ___ Lower chain hoist and trolley to floor.
2. ___ Inspect trolley bearings and lubricate. Remove any excess
lubrication and clean wheels.
3. ___ Inspect gears and bearings on trolley.
4. ___ Inspect travel chain for wear. Remove any rust or
corrosion.
5. ___ Inspect chain sprocket and guide eyes for wear. Re-adjust
for proper alignment.
6. ___ Inspect hook bearing.
7. ___ Follow manufacturer's suggestions when disassembling clutch/
brake assembly. Lubricate as required. Reassemble.
8. ___ Inspect lift chain for condition.
9. ___ Inspect hook swivel for condition. Lubricate and.
reassemble.
10.___ Check safety latch on hook for condition and operation.
Repair as necessary.
11.___ After inspection and reassembly is completed, return hoist
and trolley to rail.
12.___ Load test hoist, make any adjustment in clutch/brake as
required
Tools and Materials:
1. Standard Tool Kit
2. Cleaning equipment. Consult the Material Safety Data Sheets (MSDS) for
hazardous ingredients and proper personal protective equipment (PPE).
3. Test weight
4. Grease and grease gun
Table of Contents | Next