Man Hours .75
Special Instructions:
1. Deenergize, tag and lock out fan motor disconnect.
2. Read manufacturer's instructions.
Items to Check & Initial Completion:
1.___ Clean unit, especially fan blades.
2.___ Inspect pulleys, belts, couplings, etc.; adjust tension and tighten
mountings as necessary. Change badly worn belts. Multi-belt drives should
be replaced with matched sets.
3.___ Perform required lubrication and remove old or excess lubricant.
4.___ Clean motor with vacuum or low pressure air (less than 40 psig). Check for
obstructions in motor cooling and air flow.
5.___ Remove tags, start unit and check for vibration and noise.
6.___ Remove all trash and debris.
Tools & Materials:
1. Standard Tool kit.
2. Vacuum
3. Cleaning materials
4. Lubricants
Table of Contents | Next