Man Hours 1.75
Special Instructions:
1. Disconnect, tag, and lock out electric circuits serving the unit.
3. Review manufacturer's instructions.
Items to Check & Initial Completion:
1.___ Thoroughly clean the drive assembly, lift platform, travel area, etc.
Remove trash and debris.
2.___ Inspect structural features, framework, support members, anchor bolts, lift
platform, etc., for condition and structural integrity. Tighten any loose
bolts or screws.
3.___ Lubricate screw mechanisms, gears, sprockets and chains, pillow blocks,
bearings, etc., as required.
4.___ Check condition of drive chains or belts and adjust or replace as required.
5.___ Operate lift through it's full range of travel, in both directions, using a
load if possible. Note operation of controls, safety devices, leveling,
and other devices or features.
Tools and Materials:
1. Standard Tool Kit
2. Cleaning equipment and materials. Consult the Material Safety Data Sheets
(MSDS) for hazardous ingredients and proper personal protective equipment
(PPE).
3. Lubricants. Consult the MSDS for hazardous ingredients and proper PPE.
Table of Contents | Next