Man Hours 3
Special Instructions:
1. Review manufacturer's maintenance recommendations.
2. Daily lubrication should be accomplished by the operator.
Items to Check & Initial Completion:
1.___ Change oil and filter every fifty operating hours.
2.___ Service air and fuel filters.
3.___ Inspect engine, clean cooling air passages.
4.___ Clean and gap, or change spark plug.
5.___ Check oil level in gear boxes.
6.___ Adjust tension and/or replace V-belts.
7.___ Adjust brakes, brushes, and operating mechanisms as recommended by the
manufacturer's instructions.
8.___ Inspect entire unit.
9.___ Clean up work area and remove all debris.
Tools & Materials:
1. Standard Tool Kit
2. Oil
3. Gap gauge
4. Brake adjusting tool
5. Belts
6. Spark plug (if required)
Table of Contents | Next