Items to Check & Initial Completion:
1. ___ Lube pump and motor bearings
2. ___ Check all mounts. Tighten as required.
3. ___ Check alignment and coupling
4. ___ Check and clean strainers
5. ___ Check all hand valves, slack back 1/2 turn
6. ___ Check mechanical seal. Replace as required
7. ___ Verify all gauges for accuracy
Comments and Recommendations:
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
Table of Contents | Next