Items to Check & Initial Completion:
1. ___ Leak check complete refrigeration circuit with
electronic leak detector
2. ___ Check belts, sheaves and coupling alignment.
Replace and adjust as required.
3. ___ Check compressor oil level, acid test oil and meg
hermetic motor. Change oil and refrigerant
filter dryer as required.
4. ___ Check compressor crankcase heater operation
5. ___ Check vibration eliminators - replace/adjust as
required.
6. ___ Inspect electrical connections, contactors,
relays and operating/safety controls.
Materials Required:
1. Belts
2. Refrigerant oil
3. Refrigerant filter dryer
4. Acid test kits
5. Oil analysis
6. Lubricants – oil and grease
7. Clean-up materials
8. Contact cleaners
Comments and Recommendations:
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
Table of Contents | Next