FPALARM/S/SYS-M Fire Protection Alarm and Security Alarm Sys - Monthly

                                                      Man Hours 3
Items to Check & Initial Completion:

Smoke/Heat Detectors:

1. ___ Check Operation using UL-Approved smoke detector testor in an aersol
       spray. Follow Manufactures Instructions
2. ___ Check for Condition of Battery (Secondary if hydro supplied and so
       equipped)
3. ___ Check Connections
4. ___ Check for Audible Alarm
5. ___ Check Units for Damage or Vandalism.

Central Detection System;

1. ___ Check Operation of System by Use of Test Switch on Panel( Note Local Fire
      Authorities should be notified that system is being tested as to not
trigger a false alarm)Follow Manufactures Instructions

Breakin Detection System;

1. ___ Check Operation of System by Use of Test Switch on Panel( Note Local
 Police Authorities should be notified that system is being tested as to
not trigger a false alarm)Follow Manufactures Instructions

Comments and Recommendations:

_______________________________________________________________________________

_______________________________________________________________________________

_______________________________________________________________________________

_______________________________________________________________________________

_______________________________________________________________________________

_______________________________________________________________________________

_______________________________________________________________________________

_______________________________________________________________________________

_______________________________________________________________________________

_______________________________________________________________________________

Table of Contents    |    Next