Man Hours 2
Special Instructions:
1. Review manufacturer's instructions.
2. Deenergize power to fan motor and media motor drive, tag and lock out
circuits.
Items to Check & Initial Completion:
1.___ Inspect framework and structure. Look for loose or missing bolts, air
leaks, condition of flashing or caulking, etc.
2.___ Inspect all moving parts for proper alignment, freedom of motion, excessive
clearance or play, etc. Clean, adjust or tighten as necessary.
3.___ Inspect powered roll, and take-up roll for correct tracking of media. On
manual operation, check wheel or hand crank.
4.___ On motor drives, check pressure sensing device(s) and/or pressure switches.
Test settings for starting and stopping motor.
5.___ Inspect motor, starter, controls, selector switch for auto warning or
indicator lights.
6.___ Check oil in gear case. Change or replenish as required. Perform required
lubrication using graphite where it is suitable. Remove old or excess
lubricant.
7.___ Remove all trash and debris.
Tools & Materials:
1. Standard Tool kit.
2. Respirator
3. Goggles
4. Appropriate lubricants
Table of Contents | Next