Man Hours 3
Special Instructions:
1. Have approved type fire extinguishers readily available.
2. Allow no open flame or smoking in area.
3. Use safety type fuel cans only.
4. Review manufacturer's instructions.
Items to Check & Initial Completion:
1. ___ Change fuel filters.
2. ___ Inspect and adjust rack on unit injector or fuel distributor pump
according to manufacturer's instructions.
3. ___ Check governor, adjust for correct speed.
4. ___ Determine fuel level, drain water from tank and inspect for contamination.
Prior arrangements should be made for local procurement of fuel in
emergencies.
5. ___ Change engine oil and filter and perform other lubrication on engine and
generator.
6. ___ Inspect cooling system for leaks, air obstructions, "V" belt tension and
proper anti-freeze solution. Make needed adjustments.
7. ___ Inspect generator winding and clean if needed.
8. ___ Clean commutator and collector rings. Check brush wear and tension in
accordance with manufacturer's instructions.
9. ___ Inspect generator heaters.
10.___ Remove old oil and diesel fuel from around generator area when
maintenance is complete.
11.___ Clean engine room and remove all debris.
Tools & Materials:
1. Standard Tool kit.
2. Belts.
Table of Contents | Next