HTRUNITSMHWTR-A Heaters, Unit (Steam and Hot Water) - Annual

                                                     Man Hours 1
Items to Check & Initial Completion:

1. ___ Clean strainer ahead of valve.  Check valve head and seats for wear and
       cutting.
2. ___ Replace valve if seats need regrinding.  Send old valve to manufacturer
       for overhaul.
3. ___ Steam quality should be examined for foreign matter if valves are being
       damaged.
4. ___ Check steam gauges.
5. ___ Check pop safety or pressure relief valve for relieving and seating.
6. ___ Check diaphragms for failure.
7. ___ Check binding of valve stem.
8. ___ Clean and adjust heater deflector fins and element.
9. ___ Clean fan and lubricate motor.
10.___ Adjust weighted lever or spring control tension.
11.___ Clean up work site.


Tools & Materials:

1.  Standard Tool Kit
    Plus Pipe wrenches to 24"
         Tubing cutters
         Flaring tool
         Small acetylene outfit
         Packing tool kit and packing
         3/4" socket set
         Crescent wrenches to 14"
2.  Fin comb
3.  Vacuum
4.  Lubricants.  Consult the Material Safety Data Sheets (MSDS) for hazardous
    ingredients and proper personal protective equipment (PPE).

Table of Contents    |    Next